Product Code:SAE J469
Title:Zinc Die Casting Alloys
Issuing Committee:Metals Technical Executive Steering Committee
Scope:Because of the drastic chilling involved in die casting and the fact that the solid solubilities of both aluminum and copper in zinc change with temperature, these alloys are subject to some aging changes, one of which is a dimensional change. Both of the alloys undergo a slight shrinkage after casting, which at room temperature is about two-thirds complete in five weeks. It is possible to accelerate this shrinkage by a stabilizing anneal, after which no further changes occur. The recommended stabilizing anneal is 3 to 6 h at 100 掳C (212 掳F), or 5 to 10 h at 85 掳C (185 掳F), or 10 to 20 h at 70 掳C (158 掳F). The time in each case is measured from the time at which the castings reach the annealing temperature. The parts may be air cooled after annealing. Such a treatment will cause a shrinkage (0.0004 in per in) of about two-thirds of the total, and the remaining shrinkage will occur at room temperature during the subsequent few weeks. Stabilizing results in a decrease in dimensions of about 0.0005 in per in from the original size of the casting. Stabilizing is, of course, unnecessary if the machine or fitting operations can be delayed until the castings have aged five weeks at room temperature.ns of about 0.0005 in per in from the original size of the casting. Stabilizing is, of course, unnecessary if the machine or fitting operations can be delayed until the castings have aged five weeks at room temperature.

标准名称：	毛皮 化学试验 挥发物的测定
替代情况：	替代QB/T 1273-1991
发布部门：	中华人民共和国工业和信息化部
发布日期：	2012-11-07
实施日期：	2013-03-01
首发日期：
作废日期：
出版社：	中国轻工业出版社
出版日期：	2013-03-01

本标准规定了毛皮中挥发物的测定方法。
本标准适用于各种毛皮。

没有内容

没有内容

没有内容